Solo 69 00 228 Manual De Instrucciones página 10

- ENGLISH -
Instruction manual
Original instructions
The hedge trimmer attachment
69 00 228 is only to be installed onto the
following power tools:
SOLO 109LG,
SOLO 129LG,
SOLO power trimmers 129LTS
A simple, quick tool change is made
possible as the lower shaft tube can be
replaced with the tool head attached.
These operating instructions only
illustrate the additional aspects for
maintenance and care and the use of the
hedge trimmer that are not found in the
operating instructions of the power tool.
As a general principle, observe all
information given in the operating
instructions for the power tool, in particular
the safety instructions.
Before installation and initial use,
read these operating instructions and the
operating instructions for the power tool
carefully and observe all safety
instructions.
Observe the maintenance guidelines
closely to ensure the long service life of
your equipment.
Your dealer will be glad to assist you
with any questions
Packaging and disposal
Please keep the original packaging in
order to protect the equipment against
transport damage in case you ever need
to ship it or transport it. If the packaging
materials are no longer required then they
must be disposed of properly in
accordance with applicable local
regulations. Cardboard packaging
materials are raw materials which can be
recycled or reused.
At the end of the equipment's service life,
please make sure that you dispose of it
properly, in accordance with the official
directives and regulations that apply in
your area.
ENGLISH 2
Hedge trimmer attachment
The following symbols are used on the tool and in these
operating instructions, in addition to the symbols used on
the power tool:
Always handle this tool with particular
care
Read these operating instructions and
the operating instructions for the power
tool
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
Wear solid shoes, preferably safety
shoes with a good tread
Never touch the cutting blades
Maintain a minimum distance of 15
metres bystanders
Supplement to the CE Declaration of Conformity in the
power tool operating instructions:
Only after fitting this hedge trimmer attachment cutting
device to an approved power tool does the entire unit
correspond to the features of a machine as described by
EC directive 98/37/EC.
The product description for the correctly fitted complete
machine is a pole hedge trimmer.
Applied standards when checking the complete machine:
EN 774:1996 + A1:1997 + A2:1997 + A3:2001
Sound power level of the complete machine (DIN 45635)
Guaranteed sound / Actual sound: 110 dB(A) / 106 dB(A)
Conformity assessment procedures
All further information in the CE Declaration of Conformity
in the operating instructions of the power tool still applies
following correct fitting.
This declaration loses its validity through any
unauthorised modification of the product or if the product
is fitted to power tools that these operating instructions
do not declare as suitable.
Sindelfingen,
st
1 January 2008
SOLO Kleinmotoren GmbH
69 00 228
Symbols
Appendix V
Wolfgang Emmerich
Executive Director