Important Safety Notes; Functional Elements - Martin Yale papermonster LA3 Instrucciones De Uso

GB

IMPORTANT SAFETY NOTES

« Mount the machine in a stable po-
sition for use (on a level surface).
Always ensure the machine is
«
mounted out of the reach of chil-
dren.
If the cutter is to be used by chil-
dren in certain circumstances, they
must be supervised by a responsible
adult.
2
1
Legend
1 Laminating insert
2 Housing
3 Anti-block system
4 Indicator
5 100/125 mic
6 OFF
7 Slide switch
8 80 mic
1. Pls connect to correct power supply and slide
the switch to hot, LED indicator (red) will be
on.
- Before laminating, pls choose laminating film
of proper thickness as per the material to be
laminated. If choosing laminating film of spe-
cial size, pls cut 3 sides tidily then insert the
material to laminate in between the film.
- The socket-outlet shall be installed near the
equipment and shell be easily accessible.
LAMINATOR
« Danger of injury! Never insert fin-
gers into opening!
« Repairs should only be carried out
by a qualified specialist.
To ensure safety,
Martin Yale spare parts should be
used.
« Always unplug the machine from
the mains power supply before
opening the machine!

FUNCTIONAL ELEMENTS

8
7
Figure 1
OPERATING GUIDE
Notice
The machine is only dedicated for
80/100/125 mic film.
- When LED indicator is red, it means the ma-
chine is preheating, after the indicator turns
to blue, it means the machine is ready for
laminating.
4 4
only original
Notice
If the switch slides from hot (blue)
to cold, pls wait until the LED indi-
cator turn to red before cold lami-
nating.
LA3
3
4
5
6