Functional Elements - Martin Yale papermonster T5 Instrucciones De Uso

GB
IMPORTANT SAFETY NOTES
Mount the machine in a stable po-
«
sition for use (on a level surface).
« Always ensure the machine is
mounted out of the reach of chil-
dren.
If the machine is to be used by chil-
dren in certain circumstances, they
must be supervised by a responsible
adult.

FUNCTIONAL ELEMENTS

Legend
1. End cap
2. Cutter
3. Locking switch
4. Base
5. Extended plate
6. Guide rail
7. Translucent clamp
8. Shim bar
9. Rotary toggle
CAUTIONS:
Sharp blade, do not touch the edge
«
of the blade.
« Remove staples, paper clips be-
fore cutting.
« Do not cut metal film and film con-
taining glass etc.
« Do not cut more sheets than cut-
ting capacity allows.
Do not carry paper cutter by hold-
«
ing the cutter head.
Always operate paper cutter with
«
both hands and on a stable sur-
face.
TRIMMER
Danger of injury! Never touch the
«
cutting edges of the round knife or
the lower knife.
« Repairs should only be carried out
by a qualified specialist.
To ensure safety,
Martin Yale spare parts should be
used.
HOW TO OPERATE ROTARY
CUTTER
Figure 1
- Place the paper cutter on a stable surface
with rotary cutter's work surface upward.
- Slide the rotary cutter need to the other side
along the guide rail.
- Place material to be trimmed at the selected
position under the transparent clamp.
- Press down the cutter with the other hand
and slide the blade toward the other side of
guide rail.
- If the size of the material to be trimmed is big-
ger than the ruler on the base, you can use
the extended plate for accurate measure-
ment.
- Do not make return cuts. Always begin cutting
from one end to the other.
4 4
only original
CHOOSE THE CUTTING STYLE
Multi-functional rotary cutter including three kind
of cutting styles:
straight line, dashed line and wavy line.
- Pull up the locking switch and turn the ro-
tary toggle to choose the cutting style. After
choosing, press down locking switch and it
can be ready to use.
T5
Figure 2