Technical Data - Martin Yale papermonster T5 Instrucciones De Uso

GB
REPLACE THE CUTTING MAT STRIP
Cutting mat has 4 cutting positions (2 each side).
When blade does not function properly caused
by cutting mat, either rotate or flip mat over the
new cutting surface, replace it with spare mat.
(see Fig 3,4)
Figure 3
Figure 4
MALFUNCTION
DISPOSING OF THE MACHINE:
Dispose of the machine in an envi-
ronmentally sound fashion at the
end of its usefull service life. Do not
dispose of any of the parts included
in the machine or its packing with
household trash.
Description
XXXXX
Note: For orders of special accessoires and spare parts, please contact your dealer.
Cutting capacity:
Cutting length:
Dimensions (L*W*H):
Weight:
- Move the cutter head to one end of the guide
rail.
- Take out the cutting mat with one finger from
the groove, which is far from the cutter head.
- Insert the new cutting mat to original posi-
tion.
SPECIAL ACCESSOIRES

TECHNICAL DATA

straight: 4 sheets
skip: 3 sheets
wave: 3 sheets
320 mm
380 x 133 x 38 mm
260 g
TRIMMER
Note:
Spare cutting mat is stored in the
guide rail. (see Fig 5)
Order-No.
5 5
REPLACE THE CUTTER HEAD
When the cutting blade is damaged or the edge
of blade is not sharp, you need to change the
cutter head.
- Pull out the end cap from the base
(see Fig 5A)
- Draw out the guide rail from the base
(see Fig 5B)
- Move out the cutter head on the other side of
the guide rail (see Fig 5C)
- Replace the cutter head with a new one, fix
the guide rail on the base, place the end cap
in the original position
Figure 5
xxxxx
T5