Operation
3
5. Close the reservoir with the cut-
ter blade (2).
6. Place the reservoir onto the mo-
tor unit in an upright position in
such a way that the cutter blade
(2) is facing down.
WARNING: Never
A
move or turn the jug
after it is properly se-
ated in the place.
7. Connect the power plug to a sui-
table power outlet.
8. Press the required cutting speed
(4) or (5).
To operate the blen-
C
der at the low speed
(4), turn the control
dial (9) to "1".
C
To mix at a high spe-
ed (5), press the spe-
ed regulator to "II".
WARNING: Never
A
run the blender for
longer than 1 minute,
otherwise it would
overheat.
Compact Smoothie Maker / User Manual
WARNING: After
A
running the applian-
ce for 1 minute, let
it cool down before
using it again.
WARNING:
sure the motor is
A
switched off and has
completely stopped
before removing the
jug (1) from the mo-
tor housing (3).
WARNING:
A
not place any utensil
(scraper, fork, etc.) in
the jug (1) while blen-
der is operating.
9. Pull the power plug out of the
power outlet.
10. Remove the jug (1) from the
motor housing (3) ; to do this,
turn the jug (1) in an anti-clock-
wise direction.
11. Remove the chopping blade (2)
by turning it counterclockwise
and attach the jar lid (8)onto
the jug (1).
Be
Do
15 / EN