Set The Sound Filter; Monitor Recording - Philips LFH 0955 Manual Del Usuario

3.2.6

Set the sound filter

Activate the sound filter to minimize low- and
high-frequency sounds and optimize voice
recordings.
Press the button
1
MENU
open the Digital Pocket Memo menu.
Press the + or – button
2
Setup menu item and press the
button .
3
Press the + or – button
3
Sound filter menu item and press the
smart button.
3
Press the + or – button
4
between Voice (sound filter active), and
Music (sound filter inactive).
Press the smart button
5
OK
ting or press the
CANCEL
exit the menu without changing the setting.
A
Delete dictation Language
Index set Record format
Author Sound filter
Voice
Setup Voice activation
Language
BACK ENTER BACK
16
while stopped to
1
to select the
2
smart
ENTER
to select the
2
ENTER
to choose
2
to save the set-
4
smart button
3
S o u n
B
d fi l t e
r :
V o i c e C
M u s i
c
O K
C A N C
E L
ENTER
3.2.7

Monitor recording

Headphones can be connected to the Digital
Pocket Memo to hear the sound being recorded
and to monitor the record level.
Connect the headphones to the headphone
1
socket of the Digital Pocket Memo.
Press the +
2
adjust the sound volume.
to
D Note
The record level cannot be adjusted using
the volume button. Adjust the microphone
sensitivity if the record level is too low or too
high by pressing the
4 during recording or in the setup menu. See
3
Adjust the microphone sensitivity
1
more information.
2
When voice-activated recording is activate, the
+ or – button changes the record threshold
level, not the volume level.
or – button during recording to
button repeatedly
MENU
on page 15 for
User manual