Rowenta PU408 Serie Manual De Instrucciones página 20

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
• You need to press the WIFI
wifi of purifier is activated.
• Check if someone else is already connected to the purifier. You can press 'WIFI' button for 3 se-
conds to re-start the connection steps.
I cannot control my purifier, why ?
If the WIFI indicator of the purifier is flashing:
1. check if your Internet connection at home is good
2. check if the password of your WIFI has been changed?
If the WIFI indicator of the purifier is lighted on, it means that the purifier is connected to the
network; in this case,
Check if your smartphone is well connected to internet ?
Can I share the purifier with someone else?
Of course! New users just need to download the App PURE AIR and create an account firstly.
Then there are 2 ways to share:
1. You need to enter in 'My Devices' , choose the purifier that you want to share, click on 'share
by email'. Enter the email of the new user, click on 'OK'
2. You need to enter in 'my devices', choose the purifier that you want to share; you can see the
'QR code'of your purifier.
The new user needs to enter in 'my devices', and click '+' in order to add new product, choose
'scan the QR code'. To scan the 'QR code 'on your screen.
The scheduling doesn't work:
If the time slot is earlier than current time, by default the product will start next day.
Why the pairing didn't work?
Supported encryption type : WPA_1/WPA_2, TIPK, PSK, AES,
Supported networks: 2.4 GHz (not 5Ghz)
If there is a problem with my home Wi-fi during my holiday period, I can't
control my purifier via the app anymore ?
If the product lost its connection, the product will stop automatically after 24h.
MAINTENANCE
Always switch the appliance off with the button (9) and unplug it before conducting any maintenance
operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Never use abrasive products which could damage your appliance's appearance.
FILTERS
Filter
Pre-filter
Active carbon filter
Allergy+ filter
NanoCaptur filter
This data is based on an average use in the appliance of 8 hours per day at the lowest speed of
AutoDay mode.
20
button for 3 seconds, you will hear a 'ding' to indicate that the
Action
Clean
Replace
Replace
Replace
Cycles
Every 2 to 4 weeks
Every 12 months
Every 2 years
Color changing
(see Color chart on filter)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pu608 seriePu6080f0Pu4080f0

Tabla de contenido