TFA Dostmann 35.1064.01.51.IT Manual De Instrucciones página 66

3. The minute will be flashing. Press the CH/ + button to just the minutes.
Confirm with the SET button and enter the "Calendar setting" or exit the setting mode
4.
by pressing the SNOOZE/ SUN button.
Note:
The unit will still try to receive the signal at each full hour despite it being manually set.
When it does receive the signal, it will change the manually set time into the received time.
During reception attempts the DCF tower icon will flash. If reception has been unsuccessful,
then the DCF tower icon will not appear but reception will still be attempted the following
hour.
CALENDAR SETTING
The date default of the weather station is 1. 1. of the year 2011 after initial set-up. Once the
radio-controlled time signals are received, the date is automatically updated. However, if the
signals are not received, the date can also be set manually. To do this:
"Date. Month." (for 24h time display)
"Month. Date." (for 12h time display)
65
Year