Call Back - Intelbras ITC 4000 Manual Del Usuario

Time: call duration, which may vary from 1 to 180 minutes. The standard
time is 30 minutes.
Example: ***99*222222#1501*1*100#. The maximum time for a dialed call
will be 100 minutes.
Incoming
This function defines the maximum time for calls received by the ITC 4000.
On the setting mode, press: 1 + 5 + 0 + 2 + * + HAB + * + time + #.
Where:
HAB:
0: disables function.
1: enables function.
Tempo: call duration, which may vary from 1 to 180 minutes. The standard
time is 30 minutes.
Example: ***99*222222#1502*1*100#. The maximum time for an incoming
call will be 100 minutes.

Call back

This function enables the ITC 4000 to make a Call back, which means that
when the ITC 4000 receive an incoming call, it will identify if the dialer is on
the Call back list. If the number is on the list, the call will be ended and short
after a new call will be made to the dialer number. The ITC 4000 can store
up to 300 numbers on the Call back list.
Enabling the function
On the setting mode, press: 1 + 5 + 0 + 6 + * + HAB + #.
Where:
HAB:
0: disables function.
1: enables function.
Example: ***99*222222#1506*1#. Function is enabled.
Adding a number
There is a list with 300 positions, which allows you to add the numbers for
your Call back list.
On the setting mode, press: 1 + position + * + number + #.
Where:
94