Remote & Accessories; Channel List; Programme Guide - CONTINENTAL EDISON CELED55SA20B3 Manual Del Instrucciones

Fader Control: Adjust the volume balance
between the main TV audio (Main) and audio
commentary (AD).
Reset: Reset all TV settings to the factory default.
Highlight Reset and press OK. A confirmation message
will be displayed, select Erase everything to proceed
with resetting. The TV will switch off/on first and the
initial setup will start. Select Cancel to exit.
Remote & Accessories
You can use wireless accessories, such as your remote
control, headphones, keyboards or game controllers
with your Android TV. Add devices to use them with
your TV. Select this option and press OK to start
searching available devices in order to pair them with
your TV. If available highlight Add accessory option
and press OK to start the search. Set your device to
pairing mode. Available devices will be recognized and
listed or pairing request will be displayed. Select your
device from the list and press OK or highlight OK and
press OK to start pairing.
Connected devices will also be listed here. To unpair
a device, highlight it and press OK. Then highlight
Unpair option and press OK. Then select OK and
press OK again to unpair the device from the TV. You
can also change the name of an connected device.
Highlight the device and press OK, then highlight
Change name and press OK again. Press OK again
use the virtual keyboard to change the name of the
device.

Channel List

The TV sorts all stored channels in the Channel List.
Press the OK button to open the Channel List in Live
TV mode. You can press the Red button to scroll up
the list page by page, or press the Green button to
scroll down.
If desired, you can filter or sort the channels or find a
channel in the channel list. Press the Yellow button
to display the Select More options. Available options
are Select Type, Sort and Find.
To filter the channels highlight Select Type and press
the OK button. You can select among Digital, Radio,
Free, Encrypted, Analogue and Network options to
filter the channel list or select Broadcast option to see
all installed channels in the channel list.
To sort the channels highlight Sort and press the OK
button. Select one of the available options and press
OK again. The channels will be sorted according to
your selection.
To find a channel highlight Find and press the OK
button. Virtual keyboard will be displayed. Enter all or
a portion of the name or number of the channel you
want to find, highlight the check mark symbol on the
keyboard and press OK. Matching results will be listed.
Note: If any option except Broadcast is selected in the
Select Type menu, you can only scroll through the channels
that are currently listed in the channel list using the Program
+/- buttons on the remote.
Editing the Channels and the Channel List
You can edit the channels and the channel list using
the Channel Skip, Channel Sort, Channel Move
and Channel Edit options under the Settings>Chan-
nel>Channels menu. You can access the Settings
menu from the Home Screen or from the TV options
menu in Live TV mode.
Note: The options Channel Sort, Channel Move and Channel
Edit may not be available and appear as grayed out depending
on the operator selection and operator related settings.
Managing Favourite Channel Lists
You can create four different lists of your favourite
channels. These lists include only the channels that
are specified by you. Press the OK button to display
the channel list. Then press Blue button to access
favourite lists. If one of the lists is being displayed on
the screen you can press the Yellow button to open
the Favorite List Selection menu in order to switch
from one list to another. Select the desired list and
press the OK button. Highlight a channel in the list
and press the OK button to watch.
To add the currently watched channel to one of your
favourite lists select the desired favourite list as
described above and press the Menu button on the
remote. Then enter the Channels menu, highlight Add
to My Favorites option and press OK. The channel will
be added to the selected favourite list. To remove that
channel from the list open the favourite list, highlight
the channel and press Blue button. In this way only the
currently watched channel can be added or removed.

Programme Guide

By means of Electronic Programme Guide (EPG)
function of your TV you can browse the event schedule
of the currently installed channels on your channel
list. It depends on the related broadcast whether this
feature is supported or not.
Electronic Programme Guide is available in Live TV
mode. You can switch to Live TV mode by either
launching the Live TV application on the Home Screen
or selecting Channels input source from the Inputs
menu on the Home Screen. To access the programme
guide while in Live TV mode, press the EPG button on
your remote. Use the directional buttons to navigate
through the programme guide. You can use the Up/
Down directional buttons or Programme +/- buttons to
switch to previous/next channel on the list and Right/
Left directional buttons to select a desired event of
the currently highlighted channel. If available, the full
name, start-end time and date, genre of the highlighted
event and a brief information about it will be displayed
on the bottom of the screen.
English - 18 -