Safety Notes; Warning And Safety Instructions - INDUSTRIAS TECHNOFLEX Pentium Manual De Instrucciones/Lista De Recambios

1B
OPERATION
1.1

Safety Notes

This manual contains CAUTIONS and WARNINGS which must be followed to prevent the possibility of improper
service, damaged to the equipment, or personal injury. Read and follow all the CAUTIONS and WARNINGS
included in this instructions manual.
WARNING:
1.2

Warning and Safety Instructions

Read All Instructions
Familiarity and proper training are required for the safe operation of this equipment! Equipment operated or
serviced improperly or by untrained personnel can be dangerous! Read all operating instructions and the
safety notes below. Familiarize yourself with the proper use of this equipment before operating it.
1.Keep your work area clean and free of clutter.
2.Keep your work area well lit.
3.NEVER operate motor in areas exposed to
flammable or explosive liquids or gases! There is
the risk of fire.
4.DO NOT allow children or people other than the
operator to handle the equipment.
5.DO NOT allow non-essential personnel or visitors in
the work area.
6.Stay alert! Watch what you are doing. Use common
sense. NEVER operate the equipment when you
are tired or while under the influence of drugs,
alcohol, or medication.
7.Keep hands, feet, hair and loose clothing away from
moving parts. They can be caught in moving parts.
8.DO NOT operate equipment if switch does not
operate properly.
1B-2
Warnings warn of conditions or practices which
could lead to personal injury.
WARNING
9.Wear
10.DO NOT force tool. Use the correct tool for
11.NEVER allow untrained personnel to operate or
12.Maintain tools with care. Keep the equiment
13.NEVER use the equipment with a defective
14.Replace
15.Any servicing, other than that covered in this
Save these instructions!
protective clothing
equipment. Goggles or safety glasses will protect
against eye damage caused by flying debris.
which it is designed.
service the equipment.
clean for better and safer performance. Inspect
the machine periodically and if damaged, have it
repaired by an authorized service facility.
switch. If the switch does not turn "ON" or "OFF",
have it repaired by an authorized service facility
before using the motor.
worn or
replacement parts designed and recomended for
use by INDUSTRIAS TECHNOFLEX S.A.
instruction manual, should be performed by an
authorized INDUSTRIAS TECHNOFLEX S.A
Service Representative.
when operating
damaged parts with
INGLÉS