Instructions Of Use - INDUSTRIAS TECHNOFLEX Pentium Manual De Instrucciones/Lista De Recambios

The combustion engine is a 4-stroke and should run on UNLEADED petrol.
For security reasons in transport, the motor crankcase DOES NOT CONTAIN OIL
and should therefore be filled to the indicated level with 20W50 detergent oil.
1.8

Instructions of Use

To starting the machine for the first use:
1.- Pull out the prop Pos. 2 so that the machine is well supported on the floor. With the machine in
this position adjust the handgrip Pos. 1 to a comfortable working position for the operator.
2.- Place the on/off switch Pos. 3 to the ON position and press the choke or generator of the
carburettor (transparent plastic membrane).
3.- Pull on the motor starter rope Pos. 4 till the motor starts. The motor has a centrifugal clutch that
keeps the machine from vibrating when idling. To produce vibrations you must accelerate, the
more you accelerate the stronger the vibrations produced. Therefore the machine should be
adjusted adequately for each job.
4.- Once the job is finished, stop the machine by changing the switch Pos. 3 to the OFF position.
(See fig: 1.8-1)
INGLÉS
OPERATION
CAUTION
Fig.: 1.8-1
1B
1B-5