Filling The Water Tank - Domo DO718K Manual De Instrucciones

4. The indicator light for the selected key lights up, the in preparation indicator light appears on the
display, and the cup illumination lights up. If you want to finish the preparation process before the
coffee is ready, press the selected key again.
5. When the coffee is ready, the appliance returns to standby mode. The appliance has an automatic
switch-off. Depending on the mode selected, the appliance will turn off after 10, 20 or 30 minutes.
1

FILLING THE WATER TANK

If the water tank indicator light flashes empty, you must fill the water tank.
1. Remove the water tank from the appliance. You can use the lid of the tank as a handle to do this.
2. Rinse the tank out and fill it with clean, cold water up to the maximum mark.
3. Put the tank back in the appliance.
! Attention: always take the water tank out of the appliance when you fill it with water to prevent
overflow and damage.
! Never use warm, hot or sparkling water, or any other liquid in the water tank.
FILL THE BEAN RESERVOIR
You can choose to place the lid directly on the reservoir, or use the accessory for the bean reservoir.
If the bean reservoir empty indicator light flashes, you must fill the bean reservoir.
1. Remove the reservoir lid. If desired, put the accessory in place to raise the bean reservoir.
2. Add the beans by slowly pouring them into the reservoir.
3. Place the lid back.
! Only use coffee beans in the bean reservoir. Never fill the reservoir with ground coffee, instant coffee,
or other ingredients or objects.
www.domo-elektro.be
1 2
1
2
3
!
2
3 4
3
43
DO718K