Harman JBL AVR 101IN Manual Del Propietário página 38

AVR
Table A8 – Surround Modes – continued
Surround Mode
DTS Neo:6 DTS Neo:6 analog processing is available with DTS and DTS 96/24 signals and
Mode Group two-channel analog or PCM signals to create a 3-, 5- or 6-channel presentation.
DTS Neo:6 Depending on the number of speakers in your system, select 3-, 5- or 6-channel
Cinema modes, enhanced for movie or video presentations.
DTS Neo:6 Available only in 5- and 6-channel modes, creates a surround presentation
Music suitable for music recordings.
Logic 7 Mode Group A HARMAN proprietary technology, Logic 7 enhances two-channel and matrix-encoded
recordings by deriving separate information for the surround back channels. It provides
more accurate placement of sound, improves panning and expands the sound field,
even when used with 5.1-channel systems. Logic 7 technology uses 96kHz processing
and is available in 5.1 mode. Three variants are available.
Logic 7 Movie Especially suited to two-channel sources containing Dolby Surround or matrix
encoding, Logic 7 Movie mode increases center-channel intelligibility.
Logic 7 Music Logic 7 Music mode is well suited to conventional two-channel music recordings.
Logic 7 Game Use Logic 7 Game mode to enhance enjoyment of video-game consoles.
5-Channel Stereo Useful for parties, the left- and right-channel information is played through both
the front and surround speakers on each side, while the center speaker plays a
summed mono mix.
2-Channel Stereo Turns off all surround processing and plays a pure two-channel signal or a downmix
of a multichannel signal. The signal is digitized and bass management settings are
applied, making it appropriate when a subwoofer is used.
38
Description Incoming Bitstream or Signal
See below
• DTS 2/2/.0 or .1, 3/2/.0 or .1
• DTS 96/24
• Analog (two-channel)
• PCM (32kHz, 44.1kHz or 48kHz)
• DTS 2/2/.0 or .1, 3/2/.0 or .1
• DTS 96/24
• Analog (two-channel)
• PCM (32kHz, 44.1kHz or 48kHz)
See below
• Analog (two-channel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
• Analog (two-channel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
• Analog (two-channel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
• Analog (two-channel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
• Analog (two-channel; DSP downmix available for multichannel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)
Appendix