Analog - Samsung LN-S2651D Manual De Instrucciones

Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates when watching regular analog channels or when you have an analog external component
(such as a VCR) connected.
1. Press the MENU button to display the menu.
Press the ,*- or v buttons to select "Setup", then press the ENTER_ button.
2. Press the A or ,, buttons to select "Caption", then press the ENTER_ button.
3, Press the ENTER_ button to select "Caption".
Press the A or ,,, buttons to select "On", then press the ENTER_ button,
4, Press the ,,- or v buttons to select"Caption Mode",
then press the ENTER_ button.
Press the .,- or _ buttons to select submenu (Default, CCt-CC4 or Textt-Text4)
you want, the press the ENTER_ button.
Press the EXIT button to exit.
• The default is "COl"
• CCl : The Primary _. qchronous Caption Service. These are captions m the pnmary _angLage
ma[ mus[ be in s,,nc wi_ the sound, preferabI_, mamnea [o a specific frame.
• CC2: The Speclat Non-Synchronous Use Cap[ions
This cnannet carries data that is intended to augment information carried in the program,
• CC3: Secondary Synchronous Caption Service
Alternate program-reimea caption data, typically second language cap[_ons,
• CC4: Special Non-Synchronous Use Captions, Similar to CC2,
• Text1 : First Text Service, This may be various non-program reimea area,
• Text2: Second Text Service, Additional data usually not program re_a[ea.
• Text3/Text4: Third and Fourth Text Services,
These oa[a cnanneis snouia De usea onb, if Text1 and Text2 are not sufficient
• The Caption feature doesn't work in COMPONENT(480p, 720p, 10800, HDMI modes,
• The availability of captions depends on the program being broadcast.
English-45