Memorizing The Channels - Samsung LN-S2651D Manual De Instrucciones

Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels.
After the available channels am memorized, use the CH @ or CH @ buttons to scan through lhe channels.
This eliminates the need to change channels by enlering the channel digits. Them are three sleps for memorizing channels:
selecting a broadcast suture, memorizing the channels (automatic).
Selecting the Video Signal-source
Before your lelevision can begin memorizing the available channels, you must specify the type of signal source that is connecqed to the
TV (i.e. an anlenna or a cable syslem).
1, Press the MENU button to display the menu.
Press the A or - buttons to select "Channel", then press the ENTER_ button.
2. Press the ENTER_ button select"Antenna".
Press the ,,- or - buttons to select "Air" or "Cable", then press the
ENTER_ button,
Press the EXIT button to exit,
Storing Channels in Memory tAntomatic Method)
t. Press the MENU button to display the menu,
Press the .*- or _ buttons to select "Channel", then press the ENTER_ button,
2. Press the A or _ buttons to select "Auto Program", then press the ENTERS' button,
3, Press the ,,- or _ buttons to select the antenna connection, then press the
ENTER_ button.
Air: "Air" antenna signal, / Cable: "Cable" antenna signal. /
Air+Cable: "Air" and "Cable" antenna signals.
4, After all the available channels are stored, the "Auto Program" menu reappears.
Press the EXIT button to exit.
d5
'
I_h_ SET 0 Rt$E/
['_/ Alternately, you can press the AUTO PROG. button on the remote control to bring up
the Auto Program menu.
English- 16