Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-11.
1 AUDIO OUT
Connects to the audio input jacks on your Amplifier/
Home theater.
2 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3 PC IN
Connects to the video and audio output jacks on your
PC.
4 HDMI IN ,2,3 /DVI IN(HDMI) (AUDIO R/L)
Connects to the HDMI jack of a device with an HDMI output.
Use the HDMI 1 IN terminal for a DVI connection to an external
device. You should use the DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for a video connection,and the DVI IN
'R-AUDIO-L' terminal for audio.
- No sound connection is needed for an HDMI to HDMI
connection
- When using an HDMI/DVI cable connection, yor must use the
HDMI IN 1 terminal.
The 23 and 26 inch models supports TV, AV1, AV2,
S-Video 1, S-Video 2, Component1, Component2, PC,
HDMI1 and HDMI2.
5 ANT IN/ANT 2 IN
Connects to an antenna or cable TV system.
6 AV IN / AV IN 2
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or VCR.
7
HEADPHONE
Connects a set of external headphones for private
listening
8 SERVICE
Connector for software upgrades (see page 61).
9 COMPONENT IN ,2
Connects Component video/audio.
0 POWER INPUT
Connects the supplied power cord
! Ex LINK
(LN-T4042H, LN-T4642H)
Connect this to the jack on the optional
wall mount bracket. This will allow you to adjust the
TV viewing angle using your remote control.
see page 65.)
(
@ KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The place of the Kensington Lock may be different
depending on its model.
English - 4
[Side Panel Jacks]