Sulzer EC 531 Guia De Instalacion página 16

4.7 Schneider
ATS 48
COP menu:
Habilitar con un reinicio (OFF/ON).
Instalar un puente entre el terminal +24 V y STOP para permitir control Modbus.
ATV 12
COnF menu:
Habilitar con un reinicio (OFF/ON).
ATV 61
1.9 COMMUNICATION
1.6 COMMAND
Habilitar con un reinicio (OFF/ON).
ATV 600 series
6.1 Comm parameters
5.4 Command and refere.
Habilitar con un reinicio (OFF/ON).
ES
• Add
• tbr
• FOr
• tLP
• PCt
• FULL
◦ COM-
▪ Add
▪ Tbr
▪ Tfo
◦ Ctl-
▪ Fr 1 = Mdb
• MODBUS NETWORK
◦ Modbus address
◦ Modbus baud rate
◦ Modbus format
• Ref.1 channel = Modbus
• Modbus SL
◦ Modbus fieldbus
▪ Modbus address
▪ Modbus baud rate
▪ Modbus format
• RefFreq 1 config
◦ = Ref. freq modbus
Soft starter
Unique slave ID corresponding to EC 531 setting
Same baud rate as EC 531
Same parity as EC 531
1.8 if using default EC 531 setting
ON to enable new settings with a power reset
1->3 phase variable speed drive
Unique slave ID corresponding to EC 531 setting
Same baud rate as EC 531
Same parity as EC 531
Select modbus for control over RS 485 fieldbus
Variable speed drive
Unique slave ID corresponding to EC 531 setting
Same baud rate as EC 531
Same parity as EC 531
Select modbus for control over RS 485 fieldbus
Variable speed drive
Unique slave ID corresponding to EC 531 setting
Same baud rate as EC 531
Same parity as EC 531
Select modbus for control over RS 485 fieldbus
16