Items Included - Snapper 1226 Manual De Operación

AssemhJy
YOU WILL NEED:
* Utility knife
* Unleaded fuel
* Tire pressure gauge
* 1/2" deep socket wrench or combination
* 9/16" deep socket wrench or combination
* 7/16" wrench
ITEMS INCLUDED:
a
b h
c
g k
P
d
e
f
q
Parts Bag Contents
a 5/16" Flange Lock Nuts,2
b 5/16"Jam Nut(thin), 1
¢ 3/8" FlangeNuts,2
d 5/16" LockNut,1
e 1/4" LockNuts,2
f ChuteRotator C ontrol
Handle, 1
g 5/16" LockWasher, 1
h 3/8" Carriage Bolts,2
j 120VPower Cord,1
Figure 1
k Extra ShearPins,2
m Extra CotterPins,2
n 5/16" Carriage Bolts,2
p Zip Ties,3
q IgnitionKeys, 2
(1 pre-attached t o snowthrower)
Items not shown above:
Operator's Manual
IlhstratedPartsList
Product R egistration Card
Engine Manual
FreshStart® FuelPreserver
Cartridge
Auger
Engage
Control
Traction
Chute
Rotator
Control
Split Rod
Fuel Ca
Chute
0il
Dipstick Clean-0ut
Tool
Snowthrower - Assembled
Figure 2
DANGER
Contact with moving parts inside chute will cause
serious injury or death. Shut off engine before
unclogging discharge chute. Use clean=out tool,
not hands!
WARNING
Failure to read and follow the Operator's Manual
and all operating instructions can result in seri-
ous injury or death.
WARNING
Fuel and its vapors are flammable and explosive.
Turn off engine and wait at least 2 minutes before
refueling. Let spilled fuel evaporate before start-
ing engine.
10