J5create JUD480 Manual Del Usuario página 16

USB3.0 Boomerang Station
system.
Make sure that the USB port that you are using is JUH410/450.
-
Unplug the USB cable of USB Display device and re-insert it.
-
Check to see that the monitor is connected correctly and is powered ON.
-
Make sure to restart your computer after the driver installation.
-
Try a different USB port and/or computer.
-
Unplug all other USB devices from the system.
-
Try connecting the USB cable of USB Display device directly to the
-
computer instead of through a hub.
Reset/refresh/resynchronize your monitor.
-
Media Playback
During video playback on all platforms, please do not change the display
-
mode, position or arrangement of the video player window (such as
dragging the video player window between the main display and
attached display). This may cause the video player to stop playing. We
suggest stopping the video playback, moving the window to the attached
USB graphics display device and then selecting the video clip to start
playing.
Cursor movement is slower when the mouse hovers on the video region of
-
the Flash player,
Downsizing your screen landscape lower than 50 % will help smooth out
-
jumpy video playback for videos running in Full Screen Mode.
You may experience poor video performance on USB graphics devices
-
with low spec PC systems.
Video rendering using hardware overlays is supported.
-
Some DVD playback software packages do not support playing on a
-
second display adapter of any kind. You may try to open the media player
in the secondary display first before you start playing the DVD.
Your PC may lack certain media codec to support the playback of certain
-
15
User Manual