Horizon Fitness S3+ INDOOR CYCLE Manual Del Propietário página 10

Ocultar thumbs Ver también para S3+ INDOOR CYCLE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TENSION CONTROL AND EMERGENCY BRAKE
The preferred level of difficulty in pedaling (resistance) can be regulated in fine increments by use of the tension control
knob. To increase the resistance, turn the tension control knob clockwise. To decrease the resistance, turn the knob counter
clockwise.
IMPORTANT:
• To stop the flywheel while pedaling, push down on the
yellow emergency brake lever.
• The flywheel should quickly come to a complete stop.
• Make sure your shoes are fixed into the toe clip.
• Apply full resistance load when the bike is not in use to
prevent injuries due to moving drive gear components.
WARNING
The Indoor Cycle does not have a free moving flywheel; the
pedals will continue to move together with the flywheel until
the flywheel stops. Reducing speed in a controlled manner
is required. To stop the flywheel immediately, push down the
yellow emergency brake lever. Always pedal in a controlled
manner and adjust your desired cadence according to your
own abilities. Push the yellow lever down = emergency stop.
WARNING
The Indoor Cycle uses a fixed flywheel that builds momentum and will keep the pedals turning even after the user stops pedaling or if the
user's feet slip off. DO NOT ATTEMPT TO REMOVE YOUR FEET FROM THE PEDALS OR DISMOUNT THE MACHINE UNTIL BOTH
THE PEDALS AND THE FLYWHEEL HAVE COMPLETELY STOPPED. Failure to follow these instructions may lead to loss of control and
the potential for serious injury.
10
Tension control knob
Emergency brake

Publicidad

Tabla de contenido
loading

Tabla de contenido