Horizon Fitness S3+ INDOOR CYCLE Manual Del Propietário página 22

ASSEMBLY STEP 8
12
11
22
13
A Slip SPEED SENSOR (11) through ZIP TIE (13).
Insert SPEED SENSOR (11) into BRACKET
(12) located on the left front fork. Adjust SPEED
SENSOR (11) so that it is at the end of BRACKET
(12) and close to the flywheel. If you experience
no RPM's during your workout adjust SPEED
SENSOR (11) closer to the flywheel.
Note: Check to see there is no loose cable that could
make contact with the flywheel once the cable harness
is assembled. Gently tighten ZIP TIE (13) to keep the
cable harness in place.
B Congratulations, you have successfully assembled
the Indoor Cycle.
C Please lubricate the seat post, brake pad and
handlebar adjustment regularly with lubricant in
your parts package and check the alignment of the
sensor.
ASSEMBLY COMPLETE!
S3+
Max. User Weight: 129.6 kg / 285 lb
Product Weight: 41.5 kg / 91 lb
Overall Dimension: 110 x 47 x 90 cm /43" x 19" x 35"