Monitor Display; Clock Setting - Horizon Fitness S3+ INDOOR CYCLE Manual Del Propietário

S3+ CONSOLE DISPLAY

MONITOR DISPLAY:

At the exercise mode, the LCD windows will display RPM, KCAL and ODO.
MONITOR
120
100 140
80 160
You can press left Key to change the display among TIME/SPEED/CLOCK/DISTANCE
60
40 rpm
KCAL
LEFT & RIGHT KEY:
a. Press any key to wake up the console from energy saver mode.
b. During the exercise mode, press left change display among TIME/SPEED/CLOCK/DISTANCE.
Am
S3+ CONSOLE OPERATION

CLOCK SETTING

LEFT KEY RIGHT KEY
Press the left key until CLOCK is displayed, press the right key for 3 seconds to enter setting mode to adjust clock setting.
Change the value by pressing right key and confirm by pressing left key, the console will automatically save the value given after
5 seconds.
PERSONAL WORKOUT DATE SETTING
Press the left key until SPEED is displayed, press the right key for 3 seconds to adjust personal data setting. (user weight, gender and
workout time etc.) To change to between standard and metric press the right button when lb or kg is flashing. This will also change the
mile and km setting. Note: when the batteries are replaced the console will default to standard units.
Change the value by pressing right key and confirm by pressing left key, the console will automatically save the value given after
5 seconds.
ENERGY SAVER
To minimize energy consumption, your machine will enter energy saver mode automatically when not in use and could be quickly
24
woke up with a touch of a button.