Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The operationof anytiller can result inforeign objectsthrowninto the eyes,
which can resultin severe
eye damage_
Always
wear safety glasses
or eye
shields
before starting
your tiller and while tilling.
We recommend
standard
safety glasses
or a wide vision safety mask worn over spectacles.
HOW
TO
USE YOUR
TILLER
Know how to operate
all controls
before
adding fuel and oil or attempting
to start
engine,
STOPPING
TINES
AND DRIVE
1. Release
drive control bar to stop move-
ment_
2.
Move shift lever to "N" (neutral)
po-
sitiono
ENGINE
• Move throttle
control to "STOP"
position,
If equipped
with stop switch,
move
switch to "STOP"
position.
NOTE:
Never use choke to stop engine.
Drive Control Bar
HARD TO SHIFT GEARS
• Briefly engage
drive control
bar and re-
lease or rock tiller forward
and backward
until are able to shift gears°
DEPTH
STAKE
The depth stake can be raised or lowered
to allow you more versatile
tilling and cul-
tivating,
or to more easily transport
your
tiller_
Shallowest Tilfin(
Transport Position
Deepest Tilling
Depr, h Stake
Shift Lever
Drive Control Bar
"DISENGAGED"
Position
Throttle Control
TINE
OPERATION
- WITH
WHEEL
DRIVE
• Always
release
drive control bar before
moving shift
lever into another
position.
• Tine movement
is achieved
by moving
shift lever to either the counter
rotating
(_4;)till position
or the forward
rotating
(_) till position
and engaging
drive con-
trol bar.
FORWARD
- WHEELS
ONLY/TINES
STOPPED
.
Release
drive control bar and move shift
lever indicator
to "F" (forward)
position,
Engage drive control bar and tiller will
move forward.
REVERSE
- WHEELS
ONLY!TINES
STOPPED
to DO NOT STAND
DIRECTLY
BEHIND
TILLER
2.
Release
the drive control bar.
3_ Move throttle
control to "SLOW"
po-
sition.
4.
Move shift lever indicator
to "R" (re-
verse) position.
5.
Hold drive control
bar against the
handle to start tiller movement.
DRAG
STAKE
The drag stake should
be raised when
tilling the counter
rotating
(_) till position,
The drag stake should
be lowered
when
tilling in the forward
rotating
(_) till posi-
tion.
Lowered
(Forward Rotating tilE)
Raised
(Counter rotating tit!)
9
TILLING
NOTE:
Use the counter
rotating
tine drive
when tilling hard or rockey soil, virgin
ground or sod.
1_ Release
depth stake and drag stake
pins,
Pull the depth stake up for
increased
tilling depth.
Raise the drag
stake. Place proper pin in hole of depth
stake or drag stake to lock in position°
2.
Place shift lever indicator
in counter
rotating
(_) till position,
3.
Hold the drive control bar against
the
handle to start tilling movement,
Tines
and wheels will both turn,
Publicidad
Tabla de contenido
