Installation Instructions; Flow Diagram; En Instructions For Use / Assembly Instructions - Axor Starck Organic Instrucciones De Montaje Y Empleo

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleansing purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The fitting must be installed, flushed and tested after
the valid norms!
• The plumbing codes applicable in the respective
countries must be oberserved.
• As a standard, the wash basin mixer taps are supplied
with a jet forming device equipped with a regular
handspray stream. For an alternative jet design, an
aerator is enclosed that can easily be retrofitted on
site (see page 31 Fig. a1 - a2).
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
The product is exclusively designed for drinking water!
4
English
Symbol description
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
Assembly see page 31
Do not use silicone containing acetic acid!
Dimensions (see page 32)

Flow diagram

(see page 32)

Regular Regular //
Normal spray Regular

Normal spray Booster

Regular Booster
Operation (see page 35)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Adjustable spout
For the version for right-handers, the spout
remains in the position as supplied to the
customer. For left-handers, the spout can be
turned by 80° to ensure perfect ergonomics.
Simply unscrew the jet forming device with
a suitable wrench and insert the spout in the
different position.
Spare parts (see page 34)
Cleaning (see page 33) and en-
closed brochure
Test certificate (see page 36)