Velleman CAMCOLVC8 Manual Del Usuario página 4

• Point the camera [5] towards the field of interest.
• Press the control button [3] shortly. The status LED [6] switches
off and on again.
Recording
• Point the camera [5] towards the field of interest.
• Press and hold the control button [3] for 3s. The status LED [6]
flashes 3 times and switches off. The device is now recording. The
recorded format is AVI.
• Press the control button [3] again to stop recording. The LED [6]
turns orange again. Note that this might take a few seconds.
Note: when the memory is full or battery power becomes low, the
current file is saved and the device powers off automatically
Play back
• Connect the included USB cable to the USB port [7] and insert the
other end into a USB port of a computer (not incl.).
• The status LED [6] will light up orange and the device will now act
as a regular USB memory device. Copy, open or delete the
recordings as you would with other files on your computer system.
Note: stop the USB device in the appropriate way before
disconnecting from the US port.
Charging
• When the status LED [6] is flashing slowly, battery power is low.
• The battery charges when the device is connected to a powered
USB port or USB power adaptor (not included).
Reset
• When the device does not react anymore, use a small pin (e.g. a
paper clip) to gently press the reset-button [8].
7. Update system time
• Create a text file named SetTime.txt.
• In that text file, enter the date and time in the following format:
(YYYY=year, MM= month, DD= date, hh=hour, mm=minutes,
ss= seconds)
e.g.: 2009.11.18 13:43:00
• Plug the CAMCOLVC8 into the USB port of your PC.
• Copy SetTime.txt to the root directory of the CAMCOLVC8.
• Shut the USB device down in a proper way and unplug it from the
USB port.
• Switch on the CAMCOLVC8. At this point, date and time as
specified in the SetTime.txt file are loaded into the system
memory and the file itself is removed from the directory.
8. Battery
• This recorder contains an internal rechargeable battery. When the
device is end-of-life, this battery has to be removed.
26.02.2010
CAMCOLVC8
4
Rev. 01
©Velleman nv