∫Detaching the Lens
≥ Check that the camera is turned off.
While pressing on the
lens release button D,
rotate the lens toward
the arrow until it stops
and then remove.
• Attach the lens rear cap so
that the lens contact point
does not get scratched.
• Attach the body cap to the camera so no dirt or
dust will get inside the main unit.
∫Attaching and Detaching
the Lens Cap
Pinch the lens cap as
shown in the figure to
attach or detach.
• Be careful not to lose the lens cap.
6
VQT3R89
∫ Attaching the Lens Hood
(Supplied Accessory)
Insert the lens hood into
the lens, and turn in the
direction of the arrow
until it stops.
E: Fit to the mark
∫ Temporarily Storing the Lens Hood
1 Turn the lens hood in the direction of the
arrow to detach it.
2 Reverse the lens hood and then attach it
in the same way as shown previously.