Check to make sure you have all the pieces shown below:
Spout
Handshower Hose
Adapter
For safe operation of the valve, please observe the following:
Recommended Operating pressure:
Minimum Pressure........20 psi (0.14 MPa), dynamic
Maximum Pressure.......80 psi (0.55 MPa), static
Do not solder the connections directly to the valve as damage to the internal
components may occur.
Do not use the product at an ambient temperature below 32°F (0°C).
INCLUDED PARTS
Handshower
Handshower Bracket
with Set Screw
Lock Nuts (2 pieces)
Self-Tapping Screws with
Anchors (6 pieces each)
WARNINGS
3
Tub Filler Assembly
Mounting Bracket
(2 pieces)
Escutcheon
(2 pieces)