TFA Dostmann 35.1065 Instrucciones De Uso página 5

TFA No. 35.1065 Anleit_11_12
Indoor weather station
Operation
• Open the battery compartment and insert the battery (1x 1.5 V AAA),
polarity as illustrated. The unit is now ready to use.
Display mode
• In normal mode the left row shows the weather symbol, the middle
row the time in hours and minutes and the alarm and/or chime symbol
(in case), the right upper row the date and humidity, the lower row
the day of the week and the temperature.
• By pressing the °C/°F button the temperature unit can be changed
from °C to °F.
• To enter alarm mode, press MODE button. The alarm time is displayed.
• To enter calendar mode, press 2 x MODE button. The year is displayed.
Setting mode
• Press SET button for 2 sec. to enter the respective setting mode and
select all settings one after the other.
• When the digits are flashing set the desired time by pressing the ADJ
button. Hold and press the button for a fast count.
A. Setting of the clock
Press SET button (2 sec.)
Press SET button
Press SET button
Press MODE button
B. Setting of alarm
Press MODE button
Press SET button (2 sec.)
Press SET button
Press MODE button
C. Setting of calendar
Press MODE button
Press SET button (2 sec.)
Press SET button
Press SET button
Press MODE button
Activate / turn off alarm
• To activate / turn off the alarm and/or chime function, press ADJ but-
ton in alarm mode.
The respective symbol appears or disappears on the display.
• Press any button to stop the alarm.
8
29.11.2012 9:50 Uhr Seite 5
→ Select 12 or 24 hours system
by pressing ADJ button
→ Select Time Hours
by pressing ADJ button
→ Select Time Minutes
by pressing ADJ button
→ Exit setting mode
→ Enter Alarm mode
→ Select Alarm time Hours
by pressing ADJ button
→ Select Alarm time Minutes
by pressing ADJ button
→ Exit setting mode
→ Enter Calendar mode
→ Select Date Year
by pressing ADJ button
→ Select Date Month
by pressing ADJ button
→ Select Date Day
by pressing ADJ button
→ Exit setting mode
Indoor weather station
Snooze function
• Once the alarm starts to ring, you can activate the snooze function by
pressing the SNZ button. The snooze symbol appears on the display.
The alarm will be interrupted for 5 minutes.
MAX / MIN values
• Press the ADJ button in normal mode and the highest temperature
and humidity values are displayed since the last reset.
• Press the ADJ button again, the display shows the lowest values since
the last reset.
• Press and hold the ADJ button to reset the MAX/MIN values to the
present temperature and humidity.
Weather forecast
• The instrument has no atmospheric pressure sensor. The weather fore-
cast is based on the changes of humidity values.
Care and maintenance
• Clean the instrument with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the battery if you do not use the product for a lengthy
period.
• Keep the instrument in a dry place.
Battery replacement
• Replace the battery when the display becomes weak or the alarm level
declines.
Troubleshooting
Problems Solution
➜ Ensure the battery polarity is correct
No indication
➜ Change battery
➜ Change battery
Incorrect display
Waste disposal
This product has been manufactured using high-grade materials and
components which can be recycled and reused.
Never dispose empty batteries and rechargeable batteries in
household waste.
As a consumer, you are legally required to take them to your
retail store or to appropriate collection sites depending to
national or local regulations in order to protect the environ-
ment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste
Electrical and Electronic Equipment Directive (WEEE).
9