Sears Kenmore 110.2022 410 Serie Manual De Uso página 11

TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
Winter Storage Care directions before moving.
3. Disconnect drain from drain system and drain any
remaining water into a pan or bucket. Disconnect drain hose
from back of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer basket.
6. Drape power cord over edge and into washer basket.
7. Place packing tray from original shipping materials back
inside washer. Jf you do not have packing tray, place heavy
blankets or towels into basket opening. Close IJd and place
tape over JJd and down front of washer. Keep JJd taped
until washer is placed in new location. Transport washer in
upright position.
r
To
or
REINSTALLING/USING WASHER AGAIN
reinstall washer after non-use_vacation_ winter storage_
moving:
1. Refer to "Installation Instructions" to Iocate_ level_ and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in washer or reconnect power.
3. Run washer through Clean Washer cycle to clean washer
and remove antifreeze, if used. Use half the manufacturer's
recommended amount for a medium-size load.
11