Identification Labels - Dynafit HELMETS ST Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
fall, it must be replaced immediately even if there are no visible
signs of damage.
STORAGE TRANSPORT AND CARE:
E
Storage
You should store your helmet somewhere dry, cool and well ven-
tilated, away from direct sunlight. Avoid storing the helmet near
any heat sources, nor anywhere where it is exposed to direct or
persistent UV rays or extreme temperatures. Do not store your
helmet in your backpack. Ensure that your helmet never comes
into contact with aggressive chemicals such as battery acid, sol-
vents or salt.
Cleaning and maintenance
Heavy soiling on your helmet can be washed off with mild soap
but do not use any chemical cleaning products or solvents.
Rinse your helmet thoroughly after cleaning and dry it all over
with a towel. Do not carry out any repairs or modify your helmet
yourself. If you notice that the helmet is damaged, you should
replace it. Any incorrect action performed on your helmet or any
changes made to it can adversely affect the helmet's protec-
tive capability. If you have any questions regarding replacement
parts for your helmet, please contact your DYNAFIT specialist
dealer.
Transport
Protect your helmet from any mechanical wear or damage, solar
Manual_ST_helmet.indd 13
radiation, chemicals or dirt. The best approach is to get a protec-
tive bag for your helmet and/or a special storage and transport
container. Your helmet is delivered in a robust box which can be
used for this purpose.

IDENTIFICATION LABELS:

F
Illustration 6 Product markings
THE STANDARD WITH WHICH THE PRODUCT COMPLIES
EN12492 2012; EN 1077 2007
CERTIFIED BY
SGS United Kingdom Limited, Weston-super-Mare,
BS22 6WA, UK. Notified Body No: 0120
MANUFACTURER
Oberalp S.P.A., Via Waltraud Gebert Deeg Strasse 4,
39100 Bozen
13
14.02.17 11:40

Publicidad

Tabla de contenido
loading

Tabla de contenido