Punch Activation; Foot Pedal; Tabletop Trigger - GBC Magnapunch 2.0 Manual De Instalación Y Funcionamiento

Magnapunch 2.0 – Installation and Operating Instructions
p a
UnCh Ctivation
The Magnapunch 2.0 can be activated using either
the Foot Pedal or the Tabletop Trigger. The activation
mode is selected on the HOME screen. Using
SELECT, toggle between the modes. The mode
highlighted in green is the active punch mode.
Figure 35. Home Screen with Foot Pedal Selected.
f p
oot edal
Using the Foot Pedal allows you to ensure that the
sheets are lined up before the punch is activated.
To punch using the Foot Pedal:
1. Turn the Magnapunch 2.0 On and set the
PUNCH mode to FOOT PEDAL.
2. Push the stack of media into the Punch Throat
completely, while sliding to the left, so that the
stack presses against the Edge Guide.
Figure 36. Media Lined up for Punching.
3. Depress and then release the Foot Pedal.
4. Remove the stack of media.
t t
aBletop RiGGeR
The Tabletop Trigger allows you to quickly punch
stacks of sheets. Pressing the stack against the
Trigger, activates the punch.
To punch using the Tabletop Trigger:
1. Turn the Magnapunch 2.0 On and set the
PUNCH mode to TABLETOP TRIGGER.
2. Push the stack of sheets into the Punch Throat
completely.
Figure 37. Media Ready for Punching.
3. Slide the stack to the left into the Tabletop
Trigger, activating the punch.
Page 6-11