Temperature Measurement; Additional Information; Maintenance; Warranty - SPARKY Professional UDD 16 Instrucciones De Uso

the symbol M+ will disappear.
▪ Press MODE button for 2 seconds, the display
will show M+, the device will beep and the
current result will be stored in memory.

TEMPERATURE MEASUREMENT

▪ Select temperature measurement by pressing
FT/M button for 2 seconds.
▪ Press MODE button to return to distance
measurement mode.

ADDITIONAL INFORMATION

1. The appearance of battery symbol
the display indicates battery voltage drop
under 7V (±0.5V). The battery must be re-
placed. The measuring tool will operate
within 5 minutes after the appearance of this
symbol.
2. Message "Err" will be displayed if you at-
tempt to calculate values beyond the device
measurement range.
3. The device displays the value "0.00" during
the first measurement.
4. The device will beep if the signal is high.
5. If you have not pressed any button for a pe-
riod exceeding 60 seconds the device will
shut down.
6. Upon pressing ON/OFF button the device
will display the last result.
VI – Maintenance
Store and transport the measuring tool only in its
original packing.
Always keep the measuring tool clean. Use a
soft damp cloth and mild detergent to clean the
housing if necessary.
WARNING: Never use alcohol, petrol
or other cleaning agent. Never use caustic
agents to clean plastic parts.
WARNING: Water must never come
into contact with the tool.
Original instructions
VII – Warranty
The guarantee period for SPARKY products is
determined in the guarantee card.
Faults due to normal wear, overloading or im-
proper handling will be excluded from the guar-
antee.
Faults due to defective materials implemented
as well as defects in workmanship will be cor-
rected free of charge through replacement or
repair.
The complaints for defective SPARKY product
will be recognized if the machine is sent back to
on
the dealer or is presented to the authorised war-
ranty service centre undismantled, in its initial
condition.
Notes
Carefully read the entire Original Instructions
before using this product.
The manufacturer reserves the right to make
changes and improvements to the products and
to alter specifications without prior notice.
Specifications may differ from country to coun-
try.
5
EN