Mounting Of Handle; Mounting Of Wheel; Mounting Of Deflector - Dolmar PE-251 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MOUNTING OF HANDLE

CAUTION: Before doing any work on the Edging trimmer, always stop the
engine and pull the spark plug connector off the spark plug.
Always wear protective gloves!
– Fix a barrier to the left side of the machine together with the handle for
operator's protection.
– Do not adjust position of the loop handle too close to the control grip.
Keep not less than 250mm distance between the handle and the grip.
(a distance collar is provided for this purpose.)

MOUNTING OF WHEEL

– Mount the wheel as shown in the fugure. Tighten the bolt M8 to secure the
wheel.

MOUNTING OF DEFLECTOR

– Attach the debris deflector onto the hook on the blade cover. Tighten the
screw M5 to secure the debris deflector.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido