Ryobi GD125 Manual Del Operador página 27

 Mark the middle holes on the left and right of the bracket.
 Secure the bracket in place by installing self-tapping
screws in the center holes on the left and right sides of
the bracket. Tighten screws with a 3/8 in. socket.
Wooden
Sectional Door
Bolt
Nut
Single Panel
Door
Door
Bracket
INSTALLATION
To install the bracket on single-panel doors:
 Lower the garage door completely.
 Using a pencil and a level, draw a vertical line in the center
 Extend the line across the top edge of the door.
 Place the door bracket on the top edge of the door and
Door
 Mark the holes in the bracket.
Bracket
 Secure the bracket in place using screws. Tighten screws
Center
Line
Fig. 42
Screw
Center
Line
Fig. 43
27 - English
NOTE: For wooden doors, drill hole completely through
the door and install bracket using bolts (not provided)
and nuts (not provided), see figure 42.
of the top portion of the garage door.
center it on the line.
NOTE: The bracket can also be placed on the front upper
portion of the door if necessary.
with a 3/8 in. socket.
NOTE: For wooden doors, drill hole completely through
the door and install bracket using bolts (not provided)
and nuts (not provided).
Wooden Single
Panel Door
Door
Bracket
Bolt
Nut
Center
Line
Fig. 44