Brewing Coffee Later - Mr Coffee DMX Serie Manual Del Usuario

The Fresh Brew™ Timer Feature
The FRESH BREW™ TIMER feature lets you know how long
your coffee has been waiting for you. At the start of the
brew cycle, the FRESH BREW™ TIMER feature will automatically
be activated.
Press the FRESH BREW™ TIMER button once
(Figure 9) and the clock time will change to
show the amount of time that has passed since
brewing completed. Push again to display
current time.
NOTE: The BREW NOW/OFF MUST BE ON white
light must be on for the FRESH BREW™ TIMER
feature to operate. The time and delay brew
time cannot be set when the fresh brew time is displayed.
16
BVMC-DMX85_15ESM1.indd 17-18

BREWING COFFEE LATER

1. You must first set the time for when you would like the
coffeemaker to begin brewing your coffee as described
in Setting the Clock and the Delay Brew Timer section.
2. Prepare your coffeemaker as described in Adding Water
and Ground Coffee section.
3. To activate DELAY BREW and program your coffeemaker
to brew coffee at a later time, press the DELAY BREW
button once (Figure 10). The green DELAY BREW light
will turn on. The coffeemaker is now set to automatically
brew coffee at the pre-set later time. At this time the
Figure 9 brew strength light will turn on. You can select the
strength that you desire by pressing the BREW STRENGTH
button.
4. At the pre-set time, the white BREW NOW/OFF light will
turn on and the DELAY BREW green light will turn off,
indicating the brewing has started in the selected brew
strength. The FRESH BREW™ TIMER feature will start.
5. The coffeemaker warmer plate will keep your coffee
hot for 2 hours and then automatically turn off. Thermal
models will turn off at the end of the brew cycle.
As a safety feature, your coffeemaker will NOT start
again automatically the next day. If you want your
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set
DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW: Press the DELAY BREW
button (Figure 10).
Figure 10
17
3/3/15 9:11 AM