Instructions For Use Ib 40 Classic; Positioning - Euroflex IB 40 CLASSIC Manual De Instrucciones

INSTRUCTIONS FOR USE IB 40 CLASSIC

POSITIONING

When setting up the ironing board please note the following:
- Place the ironing board on a flat, even, dry surface, near an earthed mains socket.
- Position the ironing board securely so that nobody can knock it over or get hurt.
- Never put the appliance on or near warm surfaces or near flames.
- Use the appliance in dry rooms only.
- To avoid scalding, keep the appliance away from children.
- Use only the correct extension cables in accordance with the advice given on page 13;
be careful not to trip over the cord.
Put up the ironing board as follows:
- Place the ironing board upright on the floor (folded shelf end downward).
- Hold the end of the ironing board with one hand.
- With the other hand hold the upper part of the ironing board legs.
- Firmly pull the ironing board wide apart (1.) until the adjustment height device
- locks in place (2.).
- Place the ironing board in a horizontal position (3.).
- Unfold the shelf as shown in the illustration on page 16.
3
1 1
2
Note: Be careful that the feet of the ironing board don't slip on smooth floors while
opening/closing the ironing board.
Insert the iron cord support in one of the small holes each side of the ironing board and hang
the steam/power cord. The iron cord support prevents unwanted movement by cord-drag of
the garment being ironed as well as the "wear" of the steam/power cord.
There are two holes one each side at the rear end of the ironing board so that the cord support
can be positioned for right or left handed use.
17