Black+Decker LHT218 Manual De Instrucciones página 11

Fig. H
0-15
3. lEVEl hEDgEs (Fig. i) – To obtain exceptionally level
hedges, a piece of string can be stretched along the
length of the hedge as a guide.
Fig. I
4. siDE-TRiMMing hEDgEs (Fig. J) – Begin at the
bottom and sweep up.
Fig. J

WARNING:
OBSERVE THE FOLLOWING:
• READ INSTRUCTION MANUAL BEFORE USING,
SAVE INSTRUCTION MANUAL.
• CHECK THE HEDGE FOR FOREIGN OBJECTS SUCH
AS WIRE OR FENCES BEFORE EACH USE.
• KEEP HANDS ON HANDLES. DON'T OVERREACH.
• DO NOT USE UNDER WET CONDITIONS.

DANGER:

CAUTION:
TO GUARD AGAINST INJURY,
KEEP HANDS AWAY FROM BLADES.
BLADE COASTS AFTER TURN OFF.
MAINTENANCE

WARNING:
from trimmer before servicing, cleaning or removing
material from the gardening appliance.
The cutting blades are made from
high quality, hardened steel and
with normal usage, they will not
require resharpening. However, if
you accidentally hit a wire fence
(Fig. K), stones, glass or other hard
objects, you may put a nick in the
blade. There is no need to remove
this nick as long as it does not
interfere with the movement of the
blade. If it does interfere, unplug
the cord and use a fine toothed file or sharpening stone to
remove the nick. If you drop the trimmer, carefully inspect it
for damage. If the blade is bent, housing cracked, or handles
broken or if you see any other condition that may affect the
trimmer's operation contact your local BLACK+DECKER
Service Center for repairs before putting it back into use.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals. Do not store the
unit on or adjacent to fertilizers or chemicals.
Cleaning

WARNING:
air vents with clean, dry air at least once a week. To
minimize the risk of eye injury, always wear ANSI Z87.1
approved eye protection when performing this.

WARNING:
harsh chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Repairs
The charger and battery pack are not serviceable.

WARNING:
SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection
and replacement) should be performed by
a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacement parts.
English
Remove extension cord
Fig. K
Blow dirt and dust out of all
Never use solvents or other
To assure product
9