Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Slow running, noisy or hot
blades.
Unit will not start.
Battery won't charge
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
TROUBLESHOOTING
Possible Cause
•
Dry, corroded blades.
•
Blades or blade support bent.
•
Bent or damaged teeth.
•
Loose blade bolts.
•
Battery not installed properly.
•
Battery not charged.
•
Lock off not fully operated.
•
Battery not inserted into charger.
•
Charger not plugged in.
•
Surrounding air temperature too
hot or too cold.
Possible Solution
•
Lubricate blades.
•
Straighten blade or blade support.
•
Straighten teeth.
•
Tighten blade bolts.
•
Check battery installation.
•
Check battery charging requirements.
•
Check that lock off is fully pulled back prior
to moving
•
Insert battery into charger until green LED
appears. Charge up to 8 hours if battery
totally drained.
•
Plug charger into a working outlet.
Refer to Important Charging Notes for
more details.
•
Check current at receptacle by plugging in
a lamp or other appliance.
•
Check to see if receptacle is connected to
a light switch which turns power off when
you turn out the lights.
•
Move charger and tool to a surrounding
air temperature of above 40 °F (4.5 °C) or
below 104 °F (+40 °C).
English
11
Publicidad
Tabla de contenido
