Hkoenig NV6200 Manual De Instrucciones página 7

1) Measuring cup
Steam cleaner must always fill water before using. Please use the measuring cup to fill water in
the boiler. Do not exceed the maximum filling capacity. Refer the water capacity line in the
measuring cup.
Remark:
* Revolve the safety valve tight once the water is full .Do not overfill. Max is 1.5L.
* If the red light show on, it means there is short of water, please turn off the power and wait
cooling before opening the safety valve.
2) Extension Tube
Assemble the extension tube if the steam cleaner is to be used to clean floor or high place
windows or difficult to reach areas. To do this, push the open end of the tube into the steam
gun until the release button of the steam gun clicks into place. And one or two extension tube
if required. Press in the appropriate the release button and pull the tubes apart with a download
movement to take the extension tube off.
3) Big nozzle
This nozzle makes it possible to clean hard to reach places such as corners, joints and toilets
with ease. Simple push the bent nozzle firmly into the gun directly.
4) Metal round brush and nylon round brush
The metal and nylon round brush are pushed firmly into the bent nozzle in same way.
Even the most stubborn dirt can be removed. e.g. blinds, central heating radiators, valves, etc.
Please use small mental brush. The nylon brush is suitable for heating staining on less sensitive
materials such as stainless steel or stone. Simply pulling off with a downward movement can
remove it directly.