Oase Lunagard 20 Instrucciones De Uso página 14

6. Connect the safety transformer to the mains in a dry place that is safe from
17
7. Lay the connecting lead (18) of the garden light and connect it to the safety
18 3
17
Your garden light is now operational.
18
19
Installing the Lunagard on a surface:
21
The housing has two holes for fixing the garden light to a surface such as a wall or
17
a post.
1. Remove front screen (2) by pressing in the two pressure clips at the side (13)
2. In a stone or concrete wall, drill two holes 11 cm apart. Use the appropriate
18 21 20
3. Put the roller (14) in the desired area of illumination with the screw ring (1).
4. The connecting lead (18) can either be fed through the cable opening at the
5. Feed the connecting lead (18) through the strain release (21) and the relevant
13 2 6. Insert the screws through the housing (17) from the inside and screw the
13
7. Hook the two hooks (15) of the front screen (2) into the two slots (16) of the
8. Screw in front screen (2). Both pressure clips (13) must click into place.
2
14
15
17
16
1
17
18
9. Connect the safety transformer to the mains in a dry place that is safe from
10. Lay the connecting lead (18) of the garden light and connect it to the safety
19
21
17
18
21 20
14
Lunagard NEU.p65
GB Operating instructions
flooding. The distance between the safety transformer and the edge of the
pond must be at least 2 m.
transformer.
and unscrewing it.
rawlplugs and screws (Screw diameter= 5 mm, min. length= 5 cm).
front or the back. To do this, pull out the cable screen at the front (19) or the back
(20). Please retain the cable screen in case you need it later on.
cable opening on the underside of the housing (17).
housing to the wall or post.
housing (17).
Make sure that the roller (14) and the connecting lead are (18) correctly
positioned.
The screw ring (1) must lie completely in the "front" or "back" adjustable range!
The screw ring must not be jammed by the housing or the front screen (see
diagram)!
flooding. The distance between the safety transformer and the edge of the pond
must be at least 2 m.
transformer.
Your garden light is now operational.
14
GB
24.10.2002, 12:44