Operation; Radio Operation - Silvercrest KH 2199 Instrucciones De Uso

Operation

Connect the external mains adaptor
This device can be operated with an external mains adaptor.
Please use only mains adaptors that meet these specifications:
Input voltage:
Output voltage:
Rated current:
Polarity:
Important:
Make certain that the polarity is correct – both for the batteries as well as
for the mains adaptor. Take note of the markings on the 3V direct current
a
connection

Radio operation

1. Slide the switch ALARM ON/OFF/AUTO
2. To switch on, turn the volume controller OFF/BUZZ/VOLUME
an audible »Click« is heard.
3. Using the volume controller OFF/BUZZ/VOLUME
sound volume level.
4. Place the waveband selector switch
(FM/AM).
5. Adjust the tuning regulator
The frequencies can be read off from the frequency scale
6. To switch off, slide the switch ALARM ON/OFF/AUTO
"OFF".
230 V ~ 50 Hz
DC 3 V (+/- 5%)
min. 300 mA
. False polarity will damage the device.
d
to select the desired radio station.
- 64 -
e
into the position "ON".
o
t
at the desired frequency range
o
until
now set the desired
s
.
e
into the position