Setting The Alarm Time - Silvercrest KH 2199 Instrucciones De Uso

Setting the alarm time

If the clock is set correctly, as described above:
Whilst holding the button ALARM
1. Press several times consecutively, or press and hold, the button HOUR
to set the hours.
2. Release the button HOUR
in the display
3. Press several times consecutively, or press and hold, the button MIN
to set the minutes.
4. Release the button MIN
in the display
The adjusted alarm time will be automatically accepted as soon as the button
g
ALARM is released.
Radio alarm call
When the clock is set correctly, as described above:
1. Adjust the tuning regulator
2. Using the sound volume controller OFF/BUZZ/VOLUME
desired sound volume level.
3. To activate an alarm call with radio, place the switch ALARM ON/OFF/
e
AUTO at "AUTO". The symbol for the alarm function
appear in the display
The radio switches on at the set time and then switches itself off after about
one minute. The radio alarm sounds again on the next day at the set alarm
time. Place the switch ALARM ON/OFF/AUTO
alarm completely.
j
as soon as the desired hours setting is shown
i
.
h
as soon as the desired minutes setting is shown
i
.
d
i
.
g
pressed down:
to select the desired radio station.
e
- 66 -
o
now set the
and "Zz"
at "OFF" to disable the
j
h