Foreword; Instructions For Use; Copyright - Unitec SKF 025 Instrucciones De Manejo

Foreword

Foreword

Instructions for use

Copyright

CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Ph: 203-853-9522
Fax: 203-853-9921 • Email: info@csunitec.com • Website: www.csunitec.com
26
By purchasing this machine, you have decided in favour of a
quality product whose engineering and sturdiness have been de-
signed to meet the high demands of day-to-day professional use.
Read all the information contained here to quickly familiarise your-
self with the machine and to make full use of its functions.
This machine will serve you for many years to come if you handle
and treat it properly.
These operating instructions are part of the SKF 25 welding edge
milling machine(hereinafter referred to as the machine) and con-
tains important instructions for setup, safety, intended use an care
of the machine.
These operating instructions must always be kept in the vicinity
of the machine. They must be read and observed by all persons
entrusted with operation, troubleshooting and/or cleaning of the
machine.
Keep these operating instructions and pass them onto the next
owner of the machine.
This document is copyrighted.
Any duplication or reprinting, in whole or in part, and the reproduc-
tion of the illustrations, even in modified form, is only permitted
with the written approval of the manufacturer.
SKF 25