Safety First - Rexel ProStyle+ Manual De Instrucciones

Specifications
Cutting Type
Shred Size
Security Class
Sheet Capacity (one pass)
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current
Introduction
Thank you for choosing this shredder from Rexel. We are sure
it will serve you well, but please take a little time to read these
instructions to ensure you get the best out of your machine.

Safety First

• Please store this instruction manual in a safe place for future
reference.
• Please pay close attention to the safety symbols on the top of
the shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the
power socket and use a damp cloth. NB. Do not use any
cleaning products to clean the unit.
• Do not position the unit near to an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the
store at which it was purchased if...
- The power cable or plug is broken.
- The machine malfunctions because liquid was accidentally
spilt onto the machine.
- The shredder doesn't operate despite following the
guidelines in the manual.
• Make sure the power cable isn't a trip hazard.
• Please ensure the power supply is compatible with the
requirements of the machine (230V~50Hz).
• To avoid risk of injury, do not open the machine's casing to
attempt DIY repair. Any attempted repair by an unqualified
person will invalidate the warranty.
m
DO NOT attempt to repair shredder yourself.
KEEP OUT OF REACH OF CHILDREN.
4
Rexel ProStyle+
Confetti Cut
4 x 35mm
DIN S3
12 sheets (80 gsm)
230mm
H405 x W225 x D420mm
230V~50Hz
2 amps
m
Lights and Icons Explained
Colour of LED
Power On/Off Switch
Auto Mode
Forward Mode
Reverse Mode
Cool Down Indicator
Sleep Mode
Description of product parts
U On/off button (at rear of machine)
A
U Important safety symbols
B
U Paper and credit card entry slot
C
U CD entry slot
D
U Auto button
E
U Reverse button
F
U Continuous forward function
G
U Pull out bin with viewing window
H
U Cool down (red light)
I
U CD Bin (not shown)
J
LEDs
Auto Cool Down
Blue Red
light
light
light
light light