Rexel ProStyle+ Manual De Instrucciones página 5

Shredder Control Panel
Auto Forward
Safety First
This means you should be careful because long hair can
become entangled in the cutting head.
This means don't reach into the feed opening of the
cutting head.
This means be careful of ties and other loose clothing
which could become entangled in the cutting head.
This means keep children away from shredder.
This means be careful of loose jewelry which could
become entangeld in the cutting head.
This means no aerosols.
This means machine is cooling down.
Preparation before use
How to use the shredder correctly:
Take care not to insert fingers, ties or other objects into the
1
entry slot of the shredder.
We recommend you remove staples and paperclips from
2
paper before shredding and avoid laminated documents,
plastic bags etc. from being passed through the shredder.
This will prevent damage to the cutters.
Do not shred wet paper as it can tangle in the cutters.
3
Do not shred more than the stated sheet capacity in one
4
pass.
Do not shred continuously for more than 3 minutes at a
5
time. Running the unit for too long may make the motor
overheat. If the motor over heats, allow it to cool down for at
least 30 minutes before resuming use.
Do not use the reverse function if it's not necessary.
6
( )
Over use of the reverse
( )
shredded paper becoming jammed in the entry slot, which
will adversely affect the performance of the shredder.
Reverse
function can result in
Correct operating procedure
Insert plug into the AC power socket.
1
Check the shredder bin is fully closed.
2
Push the Auto button ( ), the shredder is now ready for
3
use.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, use the reverse
function to unblock the shredder (see Reverse function section).
Alternating between the reverse and continuous forward
functions will help unblock the feed area.
Over Heating
If this product is used continuously for long periods of time the
shredder may overheat. If this occurs the thermometer symbol
on the indicator panel will illuminate.
When the shredder is ready to be used again the thermometer
symbol will not illuminate.
G
5