Tabla de contenido
Publicidad
PROBLEM
POSSIBLE CAUSE
The cigarette plug is loose
The unit does
The compressor is stuck
not work
A solder is broken inside
The light is off
A solder is broken inside
The manometer
The chip of the
is not working /
manometer is broken
not stable
ENVIRONMENTAL PROTECTION
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this
product for environmentally safe recycling. Separate collection of
used products and packaging allows materials to be recycled and
used again.Re-use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials. Local regulations
may provide for separate collection of electrical products from the
household, at municipal waste sites or by the retailer when you
purchase a new product.
SOLUTION
Press the cigarette plug
firmly into the socket.
The compressor needs to be
repaired by your distributor or
authorized repairer: the screw
of gear is loose, it needs to be
tightened.
The compressor needs to be
repaired by your distributor or
authorized repairer: the
corresponding wire/connection
needs to be re-welded.
The compressor needs to be
repaired by your distributor or
authorized repairer: the
corresponding wire/connection
needs to be re-welded.
Stop using the compressor.
Do not continue to inflate
automotive tires using a broken
manometer. The manometer
needs to be changed by your
distributor or authorized repairer.
55
DECLARACIÓN CE DE CONFORMIDAD
El fabricante o el importador (táchese lo que no proceda) :
MGTS SA
12 avenue des Morgines
CH-1213 Petit-Lancy
Suisse
representada por la persona autorizada para la elaboración de la ficha técnica :
Franck COLLIER
MGTS CONCEPTION
Parc de l'Innovation
Rue de Menin
59520 Marquette lez Lille
France
declara que la herramienta indicada a continuatión :
Nombre comercial : Mini compresor
Denominación genérico : Compresor
Función : La inflación
Modelo / código MGTS : 03.12.022 / 21299
Tipo : 12 V/10 bars
cuyo número de serie es : consulte la página 1
cumple con todas las disposiciones de :
- directiva 2006/42/EC relativa a las máquinas,
- directiva 2014/30/UE sobre en materia de compatibilidad electromagnética,
- directiva 2011/65/UE sobre restricciones a la utilización de determinadas sustancias
peligrosas en aparatos eléctricos y electrónicos.
y cumple con la norma :
- EN 1012-1:2010
- EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
- IEC 62321:2008
Realizado en Marquette-lez-Lille, la 08 / 02 / 2017
Franck Collier, Gerente de Calidad
4
Publicidad
Tabla de contenido
