Dexter 20VRH2-17.1 Manual De Instrucciones página 318

FR FR
ES ES 2. SAFETY INSTRUCTIONS
PT PT
hidden in the work area or call the local utility company for
assistance. Contact with electric lines can lead to fire and electric
IT IT
shock. Damaging a gas line can lead to explosion. Penetrating a water
line causes property damage or may cause an electric shock.
EL EL
E. Firmly tighten the auxiliary handle, hold the machine firmly
with both hands while working and keep proper footing and
PL PL
balance at all times. The machine is securely guided with both hands.
F. Secure the workpiece. A workpiece clamped with clamping devices
RU RU
or in a vice is held more secure than by hand.
G. For drilling without impact in wood, metal, ceramic and plastic as well
UA KZ
as for screw driving, tools without SDS-plus are used (e.g., drill bits with
cylindrical shank). For these tools, a keyless chuck or a key type drill
UA KZ
chuck are required.
H.Replace a damaged dust protection cap immediately. The dust
RO RO
protection cap largely prevents the penetration of drilling dust into the
tool holder during operation. When inserting the tool, pay attention
BR
BR
that the dust protection cap is not damaged.
I. Dust from materials such as lead-containing coatings, some
EN
EN
wood types, minerals and metal can be harmful to one's health
and cause allergic reactions, lead to respiratory infections
and/or cancer. Materials containing asbestos may only be worked by
specialists.
. As far as possible, use a dust extraction system suitable for the material.
. Provide for good ventilation of the working place.
. It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to be
worked.
J. Prevent dust accumulation at the workplace. Dust can easily
ignite.
K. When drilling it is common that the core / drill bit jams in the material
being drilled. This will result in the drill trying to rotate around the drill
bit and potentially come out of your grip. This SDS Drill has a safety
clutch mechanism. This safety clutch mechanism will be activated
and stop the drive to the drill bit BUT only if you resist the initial forces
318