Publicidad
GENERAL SAFETY WARNINGS / SYMBOLS
„ Prevent unintentional starting. Ensure the switch
is inthe off-position before connecting to power
sourceand/or battery pack, picking up or carrying
the tool.Carrying power tools with your finger on the
switch orenergising power tools that have the switch
on invitesaccidents.
„ Remove any adjusting key or wrench before
turningthe power tool on. A wrench or a key left
attached toa rotating part of the power tool may
result inpersonal injury.
„ Do not overreach. Keep proper footing and balanceat
all times. This enables better control of the powertool
in unexpected situations.
„ Dress properly. Do not wear loose clothing
orjewellery. Keep your hair, clothing and gloves
awayfrom moving parts. Loose clothes, jewellery or
longhair can be caught in moving parts.Your machine
has been engineered and manufactured tohigh
standard for dependability, ease of operation,and
operator safety. When properly cared for, it will
giveyou years of trouble-free performance.Thank
you for buying a product.
POWER TOOL USE AND CARE
„ Do not force the power tool. Use the correct
powertool for your application. The correct power
tool willdo the job better and safer at the rate for
which it wasdesigned.
„ Do not use the power tool if the switch does not
turn iton and off. Any power tool that cannot be
controlledwith the switch is dangerous and must be
repaired.
„ Store idle power tools out of the reach of children
anddo not allow persons unfamiliar with the power
tool orthese instructions to operate the power tool.
Powertools are dangerous in the hands of untrained
users.
„ Maintain power tools. Check for misalignment
orbinding of moving parts, breakage of parts and
anyother condition that may affect the power
tool'soperation. If damaged, have the power tool
repairedbefore use. Many accidents are caused by
poorlymaintained power tools.
„ Keep
cutting
Properlymaintained cutting tools with sharp cutting
edges areless likely to bind and are easier to control.
„ Use the power tool, accessories and tool bits
etc. inaccordance with these instructions, taking
intoaccount
the
working
work to beperformed. Use of the power tool for
operationsdifferent from those intended could result
in ahazardous situation.
BATTERY TOOL USE AND CARE
„ Recharge only with the charger specified by
themanufacturer. A charger that is suitable for one
typeof battery pack may create a risk of fire when
usedwith another battery pack.
„ Use
power
tools
designatedbattery packs. Use of any other battery
packs maycreate a risk of injury and fire.
tools
sharp
and
conditions
and
only
with
specifically
„ When battery pack is not in use, keep it away
fromother metal objects, like paper clips, coins,
keys,nails, screws or other small metal objects,
that canmake a connection from one terminal to
another.Shorting the battery terminals together may
causeburns or a fire.
„ Under abusive conditions, liquid may be ejected
fromthe
accidentallyoccurs, flush with water. If liquid contacts
eyes,additionally seek medical help. Liquid ejected
fromthe battery may cause irritation or burns.
SERVICE
„ Have your power tool serviced by a qualified
repairperson using only identical replacement parts.
Thiswill ensure that the safety of the power tool
ismaintained.
SAVE
THESE
THEMFREQUENTLY AND USE THEM TO INSTRUCT
OTHERSWHO MAY USE THIS UNIT. IF YOU
LOAN SOMEONETHIS UNIT, LOAN THEM THESE
INSTRUCTIONS ALSO.
clean.
the
battery;
avoid
contact.
INSTRUCTIONS.
2
EN
If
contact
REFER
TO
Publicidad
Capítulos
