Cattani MICRO SMART Manual De Istrucciones página 36

Entering Access Passwords
The Drive Status menu is the only menu that can be acces-
sed without the use of an access password.
To enter the User Parameters and System Parameters Se-
tup menus, you must fi rst enter an access password:
Access password for
0000123000.
Access password for the System Parameters Setup menu:
0000456000.
From the CATTANI S.p.A. menu, press
The Access Password
0000000000 should then be displayed.
I
Press the Enter Key which will make a cursor appear
on the last zero to the right.
Press until the cursor is fl ashing on the 6th zero.
Press until number 1 appears.
Press to move to the next zero and then press
until number 2 appears.
Press to move to the next zero and then
until number 3 appears.
I
Press the Enter Key to confi rm the password. The
cursor will disappear.
Press to return to the Cattani S.p.A. menu.
It is now possible to modify the parameters of the User
Parameters menu.
Repeat the same process to enter the password
0000456000 to gain access to the System Parameters Se-
tup menu.
the User Parameters
and then
screen Access Password
menu:
.
press
35